Saturday, May 22, 2010
My welding is getting better
. This is an area at the top of the left rear fender. Patched with a new piece of metal where the corrosion was copletely through. Next two shots show a before and after of the left rear fender by the top of the b-pillar. Last shows a fix on a previously posted shot of the portion of the lower right rear fender.


This shows some
of my not-so-good gas welding. First photo is of the right rear fender which was cracked in a few places at the very back corner. The second
is the same location fom the outside. I'll get better once I relearn. Third shot is of the bottom edge, same fender. This fender was hit low and this curve was an almost straight line prior to rebending.
Saturday, May 8, 2010
Shot along the steering column to the firewall. Interesting in that all of the locations where things were removed, here the voltage regulator and fuse box, indicate that all of the original engine bay colors were black prior to the gold. No evidence of the white original exterior color. Not sure that I am fond of the idea of doing this black in lieu of the body color.
Next shots are of the rear section, first showing the b-pillars cut away-not yet cleaned up, later two showing the damage to the rear of the trunk toneau sections. This was previously repaired. A case of the cure being worse than the disease.
Sunday, May 2, 2010
Subscribe to:
Posts (Atom)
